基于J2EE架构的企业卡资源管理系统的设计与实现     

任建豪  李成忠 《成都信息工程学院学报》2005,20(5):566-570

介绍了J2EE架构和多层体系结构的发展，在B／S三层架构的基础上给出了包含应用服务器中间件的多层分布式应用体系结构，并把此体系结构应用于电信氽业的有价卡管理系统项目中。分析了此项同的功能结构和体系结构，采用J2EE开发平台和技术设计实现了由浏览器、Web服务器、应用服务器、数据库服务器组成的多层体系架构。  相似文献   

Sedimentary characteristics of tide-dominated estuary in Donghetang Formation（Upper Devonian）, central Tarim Basin     

WANG Li-ping LI Chuang TANG Bing-yong 《东北亚地学研究》2005,8(1):78-93

The Donghetang Formation （Upper Devonian） in central Tarim Basin has been thought an important oil and gas reservoir since the abundant oil and gas resources were found in the wells W16, W20, W34, and other fields. However, the sedimentary environment of the Donghetang Formation has been disputed because it suffered from both tidal and fluvial actions and there were not rich fossils in the sandstone. After the authors analyzed sedimentary features by means of drill cores, well logging data, paleosols, and with SEM obseruations, three kinds of sedimentary environments were distinguished： alluvial fan, tide-dominated estuary, and shelf. Particularly, the sedimentary features of tide-dominated estuary were studied in detail. Besides, the authors discussed sedimentary characteristics of the Donghetang Formation which was divided into two fourth-order sequences and five system tracts. At the same time, according to the forming process of five system tracts, the whole vertical evolution and lateral transition of tide-dominated estuary were illustrated clearly. Finally, the reservoir quality was evaluated based on porosity and permeability.  相似文献   

Upscaling of elastic properties for large scale geomechanical simulations     

F. Chalon  M. Mainguy  P. Longuemare  P. Lemonnier 《国际地质力学数值与分析法杂志》2004,28(11):1105-1119

Large scale geomechanical simulations are being increasingly used to model the compaction of stress dependent reservoirs, predict the long term integrity of under‐ground radioactive waste disposals, and analyse the viability of hot‐dry rock geothermal sites. These large scale simulations require the definition of homogenous mechanical properties for each geomechanical cell whereas the rock properties are expected to vary at a smaller scale. Therefore, this paper proposes a new methodology that makes possible to define the equivalent mechanical properties of the geomechanical cells using the fine scale information given in the geological model. This methodology is implemented on a synthetic reservoir case and two upscaling procedures providing the effective elastic properties of the Hooke's law are tested. The first upscaling procedure is an analytical method for perfectly stratified rock mass, whereas the second procedure computes lower and upper bounds of the equivalent properties with no assumption on the small scale heterogeneity distribution. Both procedures are applied to one geomechanical cell extracted from the reservoir structure. The results show that the analytical and numerical upscaling procedures provide accurate estimations of the effective parameters. Furthermore, a large scale simulation using the homogenized properties of each geomechanical cell calculated with the analytical method demonstrates that the overall behaviour of the reservoir structure is well reproduced for two different loading cases. Copyright © 2004 John Wiley & Sons, Ltd.  相似文献   

武汉区域气象中心数值预报业务并行计算机系统     

龚贤创  范宏飞  余康庆  王宏记 《成都信息工程学院学报》2002,17(4):236-239

对武汉区域气象中心并行计算机系统进行了详细地介绍，分析了并行计算机体系结构、网络和存储系统特点；给出了在并行计算机SP上实现数值预报业务并行化的部分结果；对数值预报模式在串、并行编程环境下的结果进行了分析比较。  相似文献   

山东省侵入岩岩石单位及其代号的厘定   总被引：1，自引：0，他引：1       下载免费PDF全文

王世进  张成基  宋明春  王沛成 《山东国土资源》2002,18(1):9-20

根据《1∶2 5万区域地质调查技术要求 (暂行 )》和我省正在进行的 1∶2 5万区调修测取得的阶段性成果 ,对山东省侵入岩岩石单位及其代号进行了厘定 :不同类型的花岗岩类均作为正式填图单位按“年代 岩性和典型产地方法”确定填图单位代号 ,而独立侵入体、脉岩和包体 ,以及基性—超基性岩则作为非正式填图单位按“年代 岩性方法”确定填图单位代号。  相似文献   

Alluvial architecture of the Holocene Rhine–Meuse delta (the Netherlands)     

MARC J.P. GOUW 《Sedimentology》2008,55(5):1487-1516

Ancient fluvial successions often act as hydrocarbon reservoirs. Sub‐surface data on the alluvial architecture of fluvial successions are often incomplete and modelling is performed to reconstruct the stratigraphy. However, all alluvial architecture models suffer from the scarcity of field data to test and calibrate them. The purposes of this study were to quantify the alluvial architecture of the Holocene Rhine–Meuse delta (the Netherlands) and to determine spatio‐temporal trends in the architecture. Five north–south orientated cross‐sections, perpendicular to the general flow direction, were compiled for the fluvial‐dominated part of the delta. These sections were used to calculate the width/thickness ratios of fluvial sandbodies (SBW/SBT) and the proportions of channel‐belt deposits (CDP), clastic overbank deposits (ODP) and organic material (OP) in the succession. Furthermore, the connectedness ratio (CR) between channel belts was calculated for each cross‐section. Distinct spatial and temporal trends in the alluvial architecture were found. SBW/SBT ratios decrease by a factor of ca 4 in a downstream direction. CDP decreases from ca 0·7 (upstream) to ca 0·3 (downstream). OP increases from less than 0·05 in the upstream part of the delta to more than 0·25 in the downstream delta. ODP is approximately constant (0·4). CR is ca 0·25 upstream, which is approximately two times larger than in the downstream part of the delta. Furthermore, CDP in the downstream Rhine–Meuse delta increases after 3000 cal yr BP. These trends are attributed to variations in available accommodation space, floodplain geometry and channel‐belt size. For instance, channel belts tend to narrow in a downstream direction, which reduces SBW/SBT, CDP and CR. Tectonics cause local deviations in the general architectural trends. In addition, the positive correlation between avulsion frequency and the ratio of local to regional aggradation rate probably influenced alluvial architecture in the Rhine–Meuse delta. The Rhine–Meuse data set can be a great resource when developing more sophisticated models for alluvial architecture simulation, which eventually could lead to better characterizations of hydrocarbon reservoirs. To aid such usage of the Rhine–Meuse data set, constraints for relevant parameters are provided at the end of the paper.  相似文献   

鄂尔多斯盆地西峰地区长8砂岩微观非均质性的实验分析     

刘林玉  王震亮  柳益群 《岩矿测试》2008,27(1):29-32

通过真实砂岩微观模型实验,客观地分析了鄂尔多斯盆地西峰地区长8砂岩的微观非均质性特征,发现该区长8储层为致密型砂岩,直观地显示出长8砂岩储层具有很强的微观非均质性,砂岩的成岩作用和孔隙结构是影响鄂尔多斯盆地西峰地区长8砂岩储层微观非均质性的主要原因。在低渗透砂岩中,引起砂岩产生强烈的非均质性,而这些砂岩则形成长8砂岩储层的高渗带。  相似文献   

鄂尔多斯盆地东缘煤储层微孔隙结构特征及其影响因素   总被引：2，自引：0，他引：2  

张松航  汤达祯  唐书恒  许浩  林文姬  张彪 《地质学报》2008,82(10):1341-1349

在对鄂尔多斯盆地东缘58套采自不同层位不同地域煤样显微组分测试和低温液氮比表面测试的基础上,从比表面积、吸附曲线形态、阶段孔径结构分布、阶段孔径比表面积贡献、FHH分形特征几个方面刻画了煤储层微孔隙特征。同时,就“孔比表面积—孔隙结构—煤物质组成与化学结构”这一因果链,分析了鄂尔多斯盆地东缘煤微孔隙特征与煤变质程度、煤岩显微组分以及矿物组分与类型的关系。研究发现,Ro在0.60%~1.91%范围内,比表面积及FHH分形分维数先明显降低,Ro至1.3%后又略有回升,同时吸附回线“滞后环”及分形尺度对应的压力范围明显减小,孔径3~4 nm“墨水瓶”型孔明显减少乃至消失,并成为比表面积减少的主要贡献者。在相似煤级条件下,惰质组分较镜质组分有更多的比表面积贡献。粘土矿物组分含量>10%时,孔径3~4 nm“墨水瓶”型孔对比表面贡献明显,且随煤级增高影响作用相对加大。  相似文献   

高、低煤阶煤层气藏地质特征及控气作用差异性研究   总被引：4，自引：0，他引：4  

王勃  巢海燕  郑贵强  李景明  郭志斌  王红岩  刘洪林  李贵中 《地质学报》2008,82(10):1396-1401

高、低煤阶煤层气地质特征及控气作用差异性是研究煤层气富集成藏的重要组成部分,是煤层气勘探开发理论研究过程中重要的基础性研究领域之一。本文以中国沁水、阜新盆地和美国粉河盆地等典型的含气盆地为例,探讨了高、低煤阶煤层气的储层物性差异,分析了构造控气和水文地质控气作用的差异性。研究表明,高煤阶气藏含气量高,CH4百分含量高,δ13C1值大于-38.75‰,储层渗透率变化小,储层改造难,构造热事件对煤层气的生成、富集贡献大,持续的水动力使气藏遭到破坏,且破坏幅度大,现今地下水格局对气藏的形成具有一定的影响;低煤阶气藏含气量低,CH4百分含量低,δ13C1值大于-49.11‰,储层渗透率变化大,储层易改造,煤热演化史及煤阶影响着煤层气的生成、富集,在煤层气生成过程中活跃的水动力是甲烷生成的主要的水文地质条件之一,但持续的水动力使气藏遭到破坏,且破坏幅度小,而合适的地层水矿化度则是低煤阶煤层气生成的重要条件,地下水格局对气藏的调整和改造起到决定性的影响。  相似文献   

Zircon U–Pb ages, Hf and O isotopes constrain the crustal architecture of the ultrahigh-pressure Dabie orogen in China     

Zi-Fu Zhao  Yong-Fei Zheng  Chun-Sheng Wei  Fu-Kun Chen  Xiaoming Liu  Fu-Yuan Wu 《Chemical Geology》2008,253(3-4):222-242

The crustal structure of the Dabie orogen was reconstructed by a combined study of U–Pb ages, Hf and O isotope compositions of zircons from granitic gneiss from North Dabie, the largest lithotectonic unit in the orogen. The results were deciphered from metamorphic history to protolith origin with respect to continental subduction and exhumation. Zircon U–Pb dating provides consistent ages of 751 ± 7 Ma for protolith crystallization, and two group ages of 213 ± 4 to 245 ± 17 Ma and 126 ± 4 to 131 ± 36 Ma for regional metamorphism. Majority of zircon Hf isotope analyses displays negative ε_Hf(t) values of − 5.1 to − 2.9 with crust Hf model ages of 1.84 to 1.99 Ga, indicating protolith origin from reworking of middle Paleoproterozoic crust. The remaining analyses exhibit positive ε_Hf(t) values of 5.3 to 14.5 with mantle Hf model ages of 0.74 to 1.11 Ga, suggesting prompt reworking of Late Mesoproterozoic to Early Neoproterozoic juvenile crust. Zircon O isotope analyses yield δ¹⁸O values of − 3.26 to 2.79‰, indicating differential involvement of meteoric water in protolith magma by remelting of hydrothermally altered low δ¹⁸O rocks. North Dabie shares the same age of Neoproterozoic low δ¹⁸O protolith with Central Dabie experiencing the Triassic UHP metamorphism, but it was significantly reworked at Early Cretaceous in association with contemporaneous magma emplacement. The Rodinia breakup at about 750 Ma would lead to not only the reworking of juvenile crust in an active rift zone for bimodal protolith of Central Dabie, but also reworking of ancient crust in an arc-continent collision zone for the North Dabie protolith. The spatial difference in the metamorphic age (Triassic vs. Cretaceous) between the northern and southern parts of North Dabie suggests intra-crustal detachment during the continental subduction. Furthermore, the Dabie orogen would have a three-layer structure prior to the Early Cretaceous magmatism: Central Dabie in the upper, North Dabie in the middle, and the source region of Cretaceous magmas in the lower.  相似文献